varitron cyclo drive gear box speed reducer motor 90 degree shaft gearbox

Cycloid gear reducer

Quick Details


Gearing Arrangement:Cycloidal
Output Torque:7.5 nM & above
Rated Power:0.37kW - 132kW
Input Speed:1800 @ 60Hz , 1500 @ 50hz
Output Speed:300rpm to 0.0000012rpm
Input pole:2P , 4P , 6P , 8P
Speed Reducer type:Cyclo Drive Gear
Production Standard:ISO , JIS , DIN , CNS , CE , ROHS
Efficiency:95% on single Stages
Interchange with:Sumitomo
Product name:90 degree shaft gearbox
Ratio:1/6 to 1/57289761
Certificate:ISO9001
Material:Gear: Bearing Steel
Cyclo Drive Type:6000 Series

Product Description


unique cycloid gear design has advantages superior to common involute tooth gears system speed reducers.

Our matchless performance and reliability is that 67% of the reduction components are in contact at all times, compared to helical gear and planetary gear designs that use only limited tooth contact. Unlike geared designs, the reduction components operate in compression rather than shear, which results to withstand shock loads exceeding ratings of 500%, provide exceptional performance, reliability and long life in most severe applications.

Main Features


- Durable and Long Service Life
The gear tooth profile of the VARITRON Cycloidal Drive enables the sharing of the load by a number of teeth, thus not susceptible to tooth breakage. At least 66% of ring gear rollers and cycloid disc loves share the shock load under compression. In addition, major torque transmission components inside the VARITRON Cycloidal Drive are made of 52100(JIS SUJ2) high carbon chromium bearing grade steel hardened to Rockwell Hardness of HRC 61~63 andwith precision grinding. The end result is that VARITRON Cycloidal Drive are capable of withstanding intermittent shock load up to 500% of its catalog torque rating.

- High Efficiency
Rolling Contact-All major torque transmitting components roll; they do not slide. Rolling motion contributs to minimal frication and high efficiency approaches 93%, anddouble stage efficiency approaches 93%, and double stage efficiency approaches 86%.

- Simple Maintenance
Lifetime grease lubrication or easy-to-replenish oil lubrication.

- Housing
Standard gray cast iron(JIS FC25) iron provides rigid structural integrity. Optional ductile iron housing(JIS FCD45) available.

- Output Shaft
High Strength Low Alloy Stell(JIS SCM21) with oversized bearings for excellent overhung load capacit and outstanding performanc.

- Dual Lips Oil Seal
Keeps lubricant in; keeps dirt out. (for flange model 8165 and above double dual lips oil seal on output side)

- Side Window (Oil Lubricate Models)
For easy oil level and clarity reading. Installing side can assign on ordering. Markers also on the side window to show how mcuk oil to fill.

- BREATHER FILLER CAP
Large oil filler hole. Oil cap also functions for pressure release purpose.

- Drain Plugs (Oil Lubricated Models)
Magnetic drain plugs design to prevent any steel dust from bearingor gear when wear in the oil. Drain plugs on double side for simple oil replavement.

,